Jump to content


system aux - PIP cards


  • Please log in to reply
1 reply to this topic

#1 garygoh

garygoh
  • Members
  • 2 posts

Posted 24 April 2006 - 08:19 AM

Does anyone know how you access/setup the enhanced AUX inputs on the networked PIP cards as described in the user manual (see below)?
Can it be done in IQwic or do you need London Architect?

"The AUX input features seven enhanced modes. The first six modes allow the AUX input to
mute or power-down either or both channels. The AUX Input Inversion Control allows either
a high or low AUX input to activate these functions. These modes can be used for emer-gency
shutdown for a fire alarm system. A simple switch closure from the alarm system
would disable an entire sound system when a fire alarm is activated."

#2 dynamic

dynamic
  • Members
  • 6 posts

Posted 25 May 2006 - 12:57 PM

QUOTE(garygoh @ Apr 24 2006, 08:19 AM)
Does anyone know how you access/setup the enhanced AUX inputs on the networked PIP cards as described in the user manual (see below)?
Can it be done in IQwic or do you need London Architect?

"The AUX input features seven enhanced modes. The first six modes allow the AUX input to
mute or power-down either or both channels. The AUX Input Inversion Control allows either
a high or low AUX input to activate these functions. These modes can be used for emer-gency
shutdown for a fire alarm system. A simple switch closure from the alarm system
would disable an entire sound system when a fire alarm is activated."
View Post




Hi,
Maybe this will help you, see page 27, 28 of the PIP-MEM ref. manual.
And remember,
Only YOU can prevent forrest fires.
Rick