HI all
I'm using a K1 for my bass and I'm very happy with my sound.
I've developed a nasty crunchy, crackling sound when I turn my level control. Is there anything I can do about it?
Regards
Ross
Australia
1
K 1 Noisy pot on channel one
Started by rosskalla, Sep 10 2005 06:58 AM
2 replies to this topic
#2
KWhitehead
-
- Crown Staff
-
- 34 posts
Power User
Posted 11 September 2005 - 02:13 AM
Sometimes rotating the pot back and fourth several times will clean out the contacts. Otherwise you need to open the amplifier up and remove the display board the pots are attached to and use contact cleaner sprayed inside the pot. If this needs to be done I would contact your distributor which is Jands to have them perform the cleaning.
Thanks,
Kip Whitehead
Crown Technical Support
Thanks,
Kip Whitehead
Crown Technical Support
#3
rosskalla
-
- Members
- 2 posts
Posted 11 September 2005 - 02:20 AM
QUOTE(KWhitehead @ Sep 11 2005, 02:13 AM)
Sometimes rotating the pot back and fourth several times will clean out the contacts. Otherwise you need to open the amplifier up and remove the display board the pots are attached to and use contact cleaner sprayed inside the pot. If this needs to be done I would contact your distributor which is Jands to have them perform the cleaning.
Thanks,
Kip Whitehead
Crown Technical Support
Thanks,
Kip Whitehead
Crown Technical Support
Thanks Kip, much appreciated. Jands is about 600 miles from here, so I'll have a cautious look meself.
Kind regards
Ross
