I have a PCC 170GT. I need the mike open all the time. The gating breaks the flow of the recording as it responds to short pauses in a conversation. Can this mike be made to operate as a normal PCC 170?
RichardB
1
Can I modify a PCC 170GT to a 170 with no gating
Started by richardb, Oct 29 2006 11:06 PM
1 reply to this topic
#2
brubart
-
- Members
-
- 52 posts
Power User
Posted 03 November 2006 - 09:49 AM
QUOTE(richardb @ Oct 29 2006, 11:06 PM)
I have a PCC 170GT. I need the mike open all the time. The gating breaks the flow of the recording as it responds to short pauses in a conversation. Can this mike be made to operate as a normal PCC 170?
RichardB
RichardB
Remove R33 3.01K. This will turn off the LED.
Remove R18 75 ohms, and solder a jumper across R6 6.8K. This will disable gating.
R33 connects directly to the LED.
R18 and R6 connect to each other and to a 0.01 uF capacitor.
The other end of R6 connects directly to the microphone capsule.
