ijaman

CE 4000 Fault lights

5 posts in this topic

Hi,

I have just bought an used CE4000 being in perfect condition - at least optically. But when I turn it on both of the "fault" lights keep constantly blinking. Short after turning the amp on you hear a relay switch and immediately switch back.

The result stays the same with pre/speakers connected or nothing connected at all (except the power cord of course).

Any Ideas?

Share this post


Link to post
Share on other sites

Hello,

Unfortunately, some one sold you an amplifier that is in fault mode. If you email me the serial number, I can check the warranty status otherwise this amplifier appears to need to be service.

Hi,

I have just bought an used CE4000 being in perfect condition - at least optically. But when I turn it on both of the "fault" lights keep constantly blinking. Short after turning the amp on you hear a relay switch and immediately switch back.

The result stays the same with pre/speakers connected or nothing connected at all (except the power cord of course).

Any Ideas?

1875[/snapback]

Share this post


Link to post
Share on other sites

Hello,

the S/N: 100754

Hello,

Unfortunately, some one sold you an amplifier that is in fault mode. If you email me the serial number, I can check the warranty status otherwise this amplifier appears to need to be service.

Hi,

I have just bought an used CE4000 being in perfect condition - at least optically. But when I turn it on both of the "fault" lights keep constantly blinking. Short after turning the amp on you hear a relay switch and immediately switch back.

The result stays the same with pre/speakers connected or nothing connected at all (except the power cord of course).

Any Ideas?

1875[/snapback]

1878[/snapback]

Share this post


Link to post
Share on other sites

I am having a similar problem with a CE2000 amp. When I try to pass signal through it, it just keeps faulting. It worked fine for a few years and then it started acting up. I can't remember exactly when I bought the amp but I bought it brand new from Guitar Centera couple of years ago. Is this easily fixable or does it need to be serviced?

Hello,

Unfortunately, some one sold you an amplifier that is in fault mode. If you email me the serial number, I can check the warranty status otherwise this amplifier appears to need to be service.

Hi,

I have just bought an used CE4000 being in perfect condition - at least optically. But when I turn it on both of the "fault" lights keep constantly blinking. Short after turning the amp on you hear a relay switch and immediately switch back.

The result stays the same with pre/speakers connected or nothing connected at all (except the power cord of course).

Any Ideas?

1875[/snapback]

1878[/snapback]

Share this post


Link to post
Share on other sites

Howdy,

Another thing that you can check to see just how old your amp is.

Here is a response by David on how to tell the production date of your Amp:

---------------------------------------------------------------------------------------------

David said:

The amplifier production date is the 4-digit code that is on the serial number sticker. The middle two digits are the month of manufacture and the outer two are the year. So if the number was something like 0083 the amplifier was manufactured August of 2003. If it was 9119 then it was manufactured November of 1999.

-----------------------------------------------------------------------------------------------

I hope that helps.

However, your Warranty period actual starts the day that you purchased the amp from a Authorized Representative of Crown.

Happy New Year!

Bud

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now