matthodkinson

OIF Files

3 posts in this topic

We do not have a published list of IQwic .oif files to device listing. If you open the .oif in a text editor it will give you a description of the IQ device it is associated with.

I did make a listing a while ago and I have updated it some recently. It may not have all the devices but it’s a start.

USM-810 firmware ver 1.00x use USM810.oif

USM-810 firmware ver 1.10x use USM110.oif

PS8810 firmware ver 2.00x use USM200.oif (Non-TCP/IQ)

PS8810 firmware ver 2.10x use USM210.oif (Non-TCP/IQ)

PS8810C firmware ver 2.00x use CNM200.oif (Non-TCP/IQ)

PS8810C firmware ver 3.10x use CNM310.oif

PS8810C firmware ver 2.10x use CNM201.oif

USP-2 firmware ver 1.00x use USP100x.oif (Non-TCP/IQ)

USP-2 firmware ver 1.01x use USP101.oif (Non-TCP/IQ)

USP-2CN firmware ver 2.00 use CNP200.oif (Non-TCP/IQ)

USP-2CN firmware ver 2.02 use CNP201.oif (Non-TCP/IQ)

PIP-Lite firmware ver 1.00 use IPL100.oif

PIP-Lite firmware ver 1.10 use IPL110.oif

PIP-Lite firmware ver 1.20 use IPL120.oif

USP-3 firmware ver 1.00 use PSH100.oif

USP-3 firmware ver 1.10 use PSH110.oif

USP-3 firmware ver 1.20 use PSH120.oif

USP-3CN firmware ver 1.00 use PSN100.oif

USP-3CN firmware ver 1.10 use PSN110.oif

USP-3CN firmware ver 1.20 use PSN120.oif

I-Techs firmware ver 1.10 use ITA110.oif

I-Techs firmware ver 1.20 use ITA120.oif

I-Techs firmware ver 1.30 use ITA130.oif

CTs-8200 use MC8200 (Non-TCP/IQ)

CTs-4200 use MC4200 (Non-TCP/IQ)

:)

Non TCP/IQ units need IQ Gateway to be run on IQwic.

Share this post


Link to post
Share on other sites
We do not have a published list of IQwic .oif files to device listing. If you open the .oif in a text editor it will give you a description of the IQ device it is associated with.

I did make a listing a while ago and I have updated it some recently. It may not have all the devices but it’s a start.

USM-810    firmware ver 1.00x use USM810.oif

USM-810    firmware ver 1.10x use USM110.oif

PS8810    firmware ver 2.00x use USM200.oif  (Non-TCP/IQ)

PS8810    firmware ver 2.10x use USM210.oif  (Non-TCP/IQ)

PS8810C    firmware ver 2.00x use CNM200.oif  (Non-TCP/IQ)

PS8810C    firmware ver 3.10x use CNM310.oif

PS8810C    firmware ver 2.10x use CNM201.oif

USP-2      firmware ver 1.00x use USP100x.oif (Non-TCP/IQ)

USP-2      firmware ver 1.01x use USP101.oif  (Non-TCP/IQ)

USP-2CN    firmware ver 2.00  use CNP200.oif  (Non-TCP/IQ)

USP-2CN    firmware ver 2.02  use CNP201.oif  (Non-TCP/IQ)

PIP-Lite  firmware ver 1.00  use IPL100.oif

PIP-Lite  firmware ver 1.10  use IPL110.oif

PIP-Lite  firmware ver 1.20  use IPL120.oif

USP-3      firmware ver 1.00  use PSH100.oif

USP-3      firmware ver 1.10  use PSH110.oif

USP-3      firmware ver 1.20  use PSH120.oif

USP-3CN    firmware ver 1.00  use PSN100.oif

USP-3CN    firmware ver 1.10  use PSN110.oif

USP-3CN    firmware ver 1.20  use PSN120.oif

I-Techs    firmware ver 1.10  use ITA110.oif

I-Techs    firmware ver 1.20  use ITA120.oif

I-Techs    firmware ver 1.30  use ITA130.oif

CTs-8200  use MC8200 (Non-TCP/IQ)

CTs-4200  use MC4200 (Non-TCP/IQ)

:)

Non TCP/IQ units need IQ Gateway to be run on IQwic.

1207[/snapback]

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now