mando

xti2000

4 posts in this topic

Press all 3 buttons down at the same time for 3 seconds. You will see the display show some diagnostics. Then press NEXT until you see the FAN setting. I think it must be FAN ON for you. To turn the fan setting from ON back to LOW or HIGH temperature sensing, press the ENTER button and turn the amp off then on and hold the button for about 10 seconds after it powers up.

To change the fan between LOW and HIGH temp sensing, press the NEXT button and turn the amp off then on and hold the button for about 10 seconds after it powers up.

Share this post


Link to post
Share on other sites
Press all 3 buttons down at the same time for 3 seconds. You will see the display show some diagnostics. Then press NEXT until you see the FAN setting. I think it must be FAN ON for you. To turn the fan setting from ON back to LOW or HIGH temperature sensing, press the ENTER button and turn the amp off then on and hold the button for about 10 seconds after it powers up.

To change the fan between LOW and HIGH temp sensing, press the NEXT button and turn the amp off then on and hold the button for about 10 seconds after it powers up.

thanx for the helpe kevin it work perfect thanx alot

Share this post


Link to post
Share on other sites

I had an early XTi2000 on my bench today, customer said "fan doesn't work". It took less than five minutes to identify that it needed the software correction but it took an hour to get CLoader V.2.19 installed and reload the firmware, then another two hours to install System Architect, debug it and update the amp software. Then, knowing I can best prevent a recall by setting the fan to the Hi programmed mode, it took another 90 minutes to find out how by stumbling upon the above text, by looking at every XTi2000 post, one by one.

The primary time-waster was the restriction on the Crown Forum search engine, which won't allow you to search for 3-character strings, such as "XTi" or "fan". Here's hoping to not spend five hours doing a fifteen minute job next time.

jHh

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now