DAVE HERGET

XTI 1000 NO SOUND

5 posts in this topic

AM USING XTI 1000 FOR BI AMP MONITORS CHANNEL A LOW CHANNEL B HI

USING EXTERNAL X OVER

ONE AMP CHANNEL A HAS NO OUTPUT NO LOWS CHANNEL B SEEMS TO BE WORKING FINE CHECKED ALL CABLES FROM X OVER AND SPEAKER CABLES SWITCHED MONITOR TO A DIFFERENT AMP ALL WORKED FINE ANYBODY HAD TROIUBLE WITH THIS THIS WAS THE THIRD SHOW THE AMP WAS USED FOR FIRST TWO THEY WORKED GREAT AND SOUNDED GREAT

THANKS FOR ANY HELP

Share this post


Link to post
Share on other sites

What mode is the amp in? Stereo Bridge-Mono?

Do you have anything else engaged in the amp? "Y"? XOV? EQ? Brig Subs?

Share this post


Link to post
Share on other sites
What mode is the amp in? Stereo Bridge-Mono?

Do you have anything else engaged in the amp? "Y"? XOV? EQ? Brig Subs?

4344[/snapback]

THE AMP IS IN STEREO MODE NOTHING ELSE ENGAGED USING AN ASHLY X OVER DSP OFF

THANKS

DAVE

Share this post


Link to post
Share on other sites
What mode is the amp in? Stereo Bridge-Mono?

Do you have anything else engaged in the amp? "Y"? XOV? EQ? Brig Subs?

4344[/snapback]

THE AMP IS IN STEREO MODE NOTHING ELSE ENGAGED USING AN ASHLY X OVER DSP OFF

THANKS

DAVE

4345[/snapback]

Hmmmm

Are you using the Banana Plugs or the SpeakOns?

If the SpeakOns which connector? CH1 or CH2?

If the a SpeakOn have you tried the banana plugs to see if they have output?

If the channel is just not working than you should send the amp in for us to look at. Go online to our web site and create an SRA (Service Return Authorization). After you have this SRA number call our Factory Service Dep't (1.800.342.6939 x8205) and they will take care of getting you a postage paid Return Shipping Label and a Box (if needed).

Share this post


Link to post
Share on other sites
What mode is the amp in? Stereo Bridge-Mono?

Do you have anything else engaged in the amp? "Y"? XOV? EQ? Brig Subs?

4344[/snapback]

THE AMP IS IN STEREO MODE NOTHING ELSE ENGAGED USING AN ASHLY X OVER DSP OFF

THANKS

DAVE

4345[/snapback]

Hmmmm

Are you using the Banana Plugs or the SpeakOns?

If the SpeakOns which connector? CH1 or CH2?

If the a SpeakOn have you tried the banana plugs to see if they have output?

If the channel is just not working than you should send the amp in for us to look at. Go online to our web site and create an SRA (Service Return Authorization). After you have this SRA number call our Factory Service Dep't (1.800.342.6939 x8205) and they will take care of getting you a postage paid Return Shipping Label and a Box (if needed).

4371[/snapback]

I'M USING HARD WIRE TO SPEAKER OUTPUTS. THE BINDING POSTS ARE TIGHT

AFTER CHECKING THE THINGS YOU SAID I FIRED UP THE AMP DID NOT CHANGE ANYTHING HOOKED UP A SPEAKER AND EVERYTHING WORKED PROPERLY IS THERE ANYWAY THE DSP CAN EFFECT THE AMP WHEN THE DISPLAY SAYS DSP OFF

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now