Sign in to follow this  
Followers 0
fredf3

CE1000 Issue

2 posts in this topic

I just purchased a CE1000. Upon powering up the unit with no input or output devices attached, the channel 2 input LED glowed steady state. I hooked up a preamp/receiver and speakers to the amp and get a steady hum from channel 2. Any ideas as to what the problem could be. I am considering returning the unit for a refund.

Share this post


Link to post
Share on other sites

Fred, it sounds like you've got a blown input op amp for that channel. The op amp is outputting DC which causes the lamp to glow (and produces hum).

What you could do is disconnect the input module and see if you still have a problem.

To do this, remove the four screws from the input module and gently lift it out. Then disconnect the ribbon cable that's attached.

Re-power and see if you still have a problem.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0