tmetal

Members
  • Content count

    2
  • Joined

  • Last visited

Community Reputation

0 Neutral

About tmetal

Contact Methods

  • ICQ
    0
  1. Does anyone have a file built yet for the DSP tunings for the JBL SRX 715 and 718? I am running 1 SRX718 bridged from my Crown XTI4000 and a pair of SRX715 bridged from my Crown XTI2000. I think I have the crossovers set right in each amp but I am unsure how to set the eq for the sub. I downloaded the tuning specs for the series from the JBL site. The sub is the only thing that needs a little extra eq. Based on a driverack 260 here is what JBL recommends as settings for a starting point. I am running the 715's in passive. SRX718 Sub: Output Gain: 1.7db Output Delay: 0.0ms Polarity: Normal Output Lo Shape: BUT18 Output Lo Freq: 31.3Hz Output Hi Shape: LR48 Output Hi Freq: 81.1Hz Output EQ1 Type: Bell Output EQ1 Freq: 68Hz Qutput EQ1 +/-: 2 db Output EQ1 Bandwith: Q:5 Output EQ2 Type: Bell Output EQ2 Freq: 41.7Hz Output EQ2 +/-: 1.5db Output EQ2 Bandwith: Q:5 SRX715 Tops Output Gain: 0db Output Delay: 0.0ms Polarity: Normal Output Lo Shape: LR48 Output Lo Freq: 91Hz Output Hi Shape: BUT6 Output Hi Freq: OUT Like I said I think I have the crossovers set right but how would I translate all of this into the crossover and EQ section of my DSP on my Xti's. Especially the eq portion. Both amps have the updated firmware and the System Architect software is working for both. Any help would be greatly appreciated! I'm sure it can be done properly being JBL, DBX, and Crown all have the same parent company. Thanks in advance for the help!