procentervest

Members
  • Content count

    6
  • Joined

  • Last visited

Community Reputation

0 Neutral

About procentervest

Contact Methods

  • ICQ
    0
  1. Hey Ryan. thanks for the fast answer. could it be possible for you to mail them to me mayby? I use SA
  2. hello there. first of all, sorry for my bad english, I'm from Denmark, hope you can understand what I'm writing. i've upgraded my PA system so I now have 4 VRX932LA in each side and 4 SRX 718s in each side. I plan to run my VRX boxes active split and would like to use my two XTi4000 (one in each side) for the HI's and my two IT4000 (one in each side) for the MID's and my two IT6000 (one in each side) for the subs. does anyone in here have the same setup? and could send me their presets? or maybe could give me some advice on what to do with this system, because I would like to know where to place the Xover in all the amps and all those other things you can do with the XTi's and the IT4000's and 6000's I have already tried JBL's homepage and have found the tunings for the VRX 900 system, but they have made i so you have to use 3 identical amps. and I have 3 different amps with different Watts power and so on. what do I do? I hope someone in here can help me out here. best regards Nick Vilhelmsen
  3. thank you for your help D Glass. sorry I mis informed you. it's only 8 VRX 932 and 8 VRX 918 / SRX 718 for the I-Techs the last 4 SRX subs are being driven by som LAB amps with 2 SRX 725. does that help on the setup? I have played a little on the system, but i needs more bass, can I do anything to help this problem without replacing the 2 IT4000 for the subs? I know it's not the best setup with the same amps for hi and low, but it is what I have, so I just want to get the best out of it. can I do anything better? in the near future I'm gonna buy 2 IT6000 and drive the system with an XTi 4000 for the hi, an IT4000 for the mid, and an IT6000 for the low, per side. and then run my SRX 712M monitors on the last 2 IT4000. but until that, how do I get the best out of my system? and again, thanks for the help already. Do like I said before and put two boxes per channel of the amplifier. That's the best you can do for now. okay thanks D Glass
  4. thank you for your help D Glass. sorry I mis informed you. it's only 8 VRX 932 and 8 VRX 918 / SRX 718 for the I-Techs the last 4 SRX subs are being driven by som LAB amps with 2 SRX 725. does that help on the setup? I have played a little on the system, but i needs more bass, can I do anything to help this problem without replacing the 2 IT4000 for the subs? I know it's not the best setup with the same amps for hi and low, but it is what I have, so I just want to get the best out of it. can I do anything better? in the near future I'm gonna buy 2 IT6000 and drive the system with an XTi 4000 for the hi, an IT4000 for the mid, and an IT6000 for the low, per side. and then run my SRX 712M monitors on the last 2 IT4000. but until that, how do I get the best out of my system? and again, thanks for the help already.
  5. hello everyone sorry for my bad english but i´m from Denmark. hope you understand me... I have 8 JBL VRX 932 and 12 JBL VRX 918 / SRX 718 subs and 4 I-tech 4000 how do I get the most out of my system? do I need to set the Sub amp to mono bridge for most effect? And how do I connect the speakers to the amps to get the most out of it? I hope You understand my Questions. Nick.