gil2th

Members
  • Content count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral

About gil2th

Contact Methods

  • ICQ
    0
  1. Sorry for the incomplete question!! the subs I using are the SR4719X 1200 watts continuos 4ohms one each channel and I have the amp out attenuator -25 dB. some times it's falls until 1 ohm, the connection are correct and I never let the input peak, what could be the problem??
  2. HI!! I HAVE I-TECH 6000 WITH JBL SR SERIES SUBS WORKING IN 4 OHMS I HAVE A LOW IMPEDANCE ERROR REPORTING LEFT CHANNEL THAT SHOWS 2 OHMS AND IN RED COLOR, THE LOUDSPEAKER IS CONNECT CORRECTLY, SO I DON'T KNOW IF THIS COULD OVERHEAT THE POWER OR CAUSE ANY DAMANGE TO MY SPEAKERS, THANK YOU SO MUCH!!
  3. hI!! I would like to know if some one are using the same configuration I tech 6000 2 with 8 VRX 932 and one more I tech with VRx 918 SUB, If so what gain structure are you using , I already used the 1.4 v setting and now I'm using 2.50 v 32 dB but still need more power in my system is there I way to get more power or just increase the input volts to avoid the input peak??, sorry for my poor english I hope some body can help me THANKS! I FORGOT SAY THAT I HAVE A MIXER WITH ONLY 1.4 V in its out.
  4. Hi!! I have 2 i tech 6000 in my network, now I want to add one more It 6000 but it has different version & firmware than old ones , please some body tell me what do i should do to add this amp to my network ?? Thank's a lot
  5. Sorry my english is poor but I'll try to do my question. It's about XTi powers that I using in Bridge mode. My question is: Is there a way to set the crossover freq. to the full range speakers that I using to mid- hi's ( vrx 932 ) in the power display or I should use the sofware ?
  6. hI i'M dAVID I have the same problem with the VRX 932 and 918, could I have the presets you have my e-mail is xxxxxxx@xxxx. I'll appreciate your help some much!!. I have a concert next friday!! My system is new with I tech 6000. I don't know the firmware version yet thank you for your help. Please do not post email addresses as this is an open forum and you may start getting things you don't want emailed to you. If you need to have something sent to you the forum offers an anonymous email you can use as well as personnel messages. d.glass Crown Tech Support