313DJ

Members
  • Content count

    28
  • Joined

  • Last visited

Community Reputation

0 Neutral

About 313DJ

  • Rank
    Power User
  1. hello dakos it's been a while,and now i know y u said the processing on the itechs are superior to the drpa's,but i have a question,i now have 4 ev qrx 218s dual 18 subs,is it ok to run the 4 subs on the 1 itech 8000,for a 5 hour gig,and will that work on a 20amp circuit,i'm also planning to run 4 ev zx5's on my itech 6000,subs are rated at 1200 rms,the tops are rated at 600rms per box,thanks in advance
  2. thanks dakos appreciate it a lot,starting to really like these itechs
  3. hello dakos the gig this past sat. night turned out really well,much thanks to u the zx5's sounded great paired with the qrx 218s's,i have a couple of questions,wanted to know if i could get the peak voltage limiter settings for my jbl srx715 800 watts continous/1600 program/3200 peak 8ohms running them off of a itech 6000, 2nd question,thinking about running 3 of my ev qrx 218s's (1200 cont. 4800 peak) off of my itech 8000 lets say if on the rms limiter i would usually set it at 1200 watts each chanell,if i used 1 on 1 channel which is a 4ohm load,and 2 on the other channel,would i give that chanell with the 2 subs which would be a 2ohm load 2400 watts on the rms limiter?also what would be my peak voltage settings for the chanell with the 2 ohm load,thanks in advance
  4. no i'm just using the factory settings for timing,and one more question should i continue to use my bbe sonic maximizer before the amp or go straight from the mixer to the amp
  5. hey dakos thanks this helps out a lot,but the srx725's are 4 ohm cabinets will that change the peak voltage settings,and if i set the rms limiter to 1/4 of its rms power specs will i get the maximum output or is this just a way to better protect the speakers
  6. hello dakos i have 2 gigs this week is it possible that u could give me the peak voltage limiter settings for the (jbl srx725 1200 cont./2400 pro./4800 peak) and the (ev zx5 600 cont./2400 peak) and once again i play mostly r&b and hip hop music,these settings will be for the itech 6000
  7. Hello again also dakos,thanks for the fast reply,is it possible that u can do an example on the jbl srx728 so i can see how u get the peak voltage limiter settings,and for the headroom for the srx728 you would give it 2000 watts on the rms average setting-1600 watts continuous divided by 4=400 + the 1600 continuous = 2000,and i was wondering can u help with the recommended crossover setting for the speakers,and should the xover for the tops match the bottoms?
  8. Thanks in advance for help,need peak voltage limiter settings and recommended crossover settings for a few different full range speakers.also if u could post the formula to get these settings that would be great,the music i play mostly is r&b and hip hop song with low bass jbl srx715 800 watts continous/1600 program/3200 peak jbl srx725 1200 cont./2400 pro./4800 peak jbl srx728s 1600 cont./3200 pro./6400 peak ev zx5 600 cont./2400 peak
  9. my jbl srx728s subs are rated at 1600/3200/6400 same as yours,the rms setting for your subs will be 1600 and the peak setting will be 160,also your tops wattage are the same as my ev qrx 218s subs and the settings for those is 1200 for the rms and 138 for the peak hope this helps the numbers came from crown tech support
  10. thanks dakos,i will get back to u,it looks like i will have to update my itech 8000
  11. ok dakos got both cables,the xti 6002 showed up on system architect but the i-tech 8000 didn't,it showed activity on the back of the amp but it was not found on the pc
  12. ok dakos and texan thriller i'm going to try and use the xti 6002 and i-tech 8000 by themselves,just need to go out and get a ethernet cable to hook the i-tech up to my pc do either of u know the correct cable for this because i see the regular ethernet cables don't work
  13. @ BOBBYSDAD YES I'M USING THE DBX RTA MIC, AND DAKOS I'M REALLY JUST GOING AFTER THE BEST SOUND QUALITY,ALSO I LIKE THE AFS OPTION FOR FEEDBACK PROTECTION FROM THE DRPA,AS FAR AS THE DSP ON THE ITECH AND XTI,I HAVE BEEN USING EXTERNAL LIMITERS SHOULD I BYPASS THOSE ALSO IF I DON'T USE THE DRPA?
  14. hello if anybody can help i would appreciate it,i have watched videos and did a lot of reading,attempted to set it up myself,i usually get stuck because it doesn't have any of my speakers or amps in the presets,so i have to use the custom option wanted to know if that option will get the full effect, also at the point in the eq wizzard where it asks u to set the volume u will be playing at i get lost really needs help with that. equipment= pioneer djm 600 mixer, bbe sonic maximizer with sub output, dbx driverack pa, 1 crown xti 6002 for tops 1 crown itech-8000 for subs 2 ev zx5 tops crossover 1.5khz 2 ev qrx 218s,crossover 80hz