arios312

Members
  • Content count

    8
  • Joined

  • Last visited

Community Reputation

0 Neutral

About arios312

  1. This bass head doesn't have a crossover and I didn't see any on his gear list so he is running them in plain parallel feeding both of them the exact same signal which means terrible wierd cancellations. the y are not running in parallel the b2re is just running the 4-10 and the xls is connected through the preamp of the b2re
  2. This bass head doesn't have a crossover and I didn't see any on his gear list so he is running them in plain parallel feeding both of them the exact same signal which means terrible wierd cancellations. This is correct I am using the preamp from the b2re tho run the xls to the 18" sub
  3. That's a great idea @arios312 Could you post a link to your speakers? It will be on the ampeg website....http://www.ampeg.com/ TECHNICAL SPECIFICATIONS: TYPE Single 18” Bass Enclosure FREQ RESPONSE (+/-3dB) 35Hz – 2kHz USABLE LOW FREQ (-10dB) 28Hz POWER HANDLING 500W RMS, 1000W Peak IMPEDANCE 4 ohms this is the specs for the 4-10 cab LF Drivers: 4 x 10” Voice Coil: 2” Magnet Weight (each): 30 oz HF Drivers: Horn/Driver Voice Coil: 1” Magnet Weight (each): 8 oz RMS Power Handling: 500-Watts Frequency Response (-3dB): 48Hz-18kHz Usable Low Frequency (-10dB): 28Hz Nominal Impedance: 4-Ohms Sensitivity: 98dB Maximum SPL: 125dB Dimensions (W x H x D inches): 24 x 30 x 19 Shipping Weight: 110 Pounds Handling Weight: 85 Pounds SENSITIVITY 97dB SPL 1w/1m MAXIMUM SPL 130dB COMPONENTS Custom Designed 18” low frequency driver
  4. Yes this is correct I am only using the preamp from the b2re to run the the 18 with the crown so what ever adjusments i make to the xls it does not affect the 4-10
  5. The b2re is only running the 4 10 cabinet and the xls is running the 18 svt sub through the preamp out
  6. What else do you have working? other amps? what kind of tops do you have? any sound processors? write to us all the gear you own... I am running an ampeg 4-10 cabinet with a b2re amp and running the crown xls1500 through it to run the 18" sub I was just looking for setting for the crown. Thanks If I got you correctly then you want to use the XLS1500/SVT18 combo in parallel to the 4-10/B-2RE to get more bass? in that case it's highly NOT recommended since the two enclosures have different frequency response and you will most certainly get a bad sounding system due to cancellations of the two uneven sources. Was that what you wanted to do? I am just using the b2re preamp out to connect the crown i am not running it parallel to the b2re if that makes any sence? Thanks
  7. What else do you have working? other amps? what kind of tops do you have? any sound processors? write to us all the gear you own... I am running an ampeg 4-10 cabinet with a b2re amp and running the crown xls1500 through it to run the 18" sub I was just looking for setting for the crown. Thanks
  8. Can someone help me in setting up my AMPEG SVT18 sub with the xls1500 what are the recommendations I would like like to get a deep bass sound see spec below..Thanks TECHNICAL SPECIFICATIONS: TYPE Single 18” Bass Enclosure FREQ RESPONSE (+/-3dB) 35Hz – 2kHz USABLE LOW FREQ (-10dB) 28Hz POWER HANDLING 500W RMS, 1000W Peak IMPEDANCE 4 ohms SENSITIVITY 97dB SPL 1w/1m MAXIMUM SPL 130dB COMPONENTS Custom Designed 18” low frequency driver