djkaoz

Members
  • Content count

    14
  • Joined

  • Last visited

Community Reputation

0 Neutral

About djkaoz

  • Birthday 02/17/1978

Profile Information

  • Gender
    Male
  • Location
    los angeles, CA
  1. Im wiring this cord directly after the meter: black-hot white-grd green-grd 120V 60Hz Im using a power works 20/20 box, its mainly a surge suppresor with V meter, but I mod it a bit. dual 15amp breaker in parallel and replace the 10ft 12gauge for a 70 ft 10gauge cord, im planing on adding one 20amp breaker and 3 15amp, this box has 12 15mps outleds.. so far it has fit my use but I dont want to over load it and have an accident... thank you waiting for ur respond... Ill should wait on adding those two other amps right Are you running a 120V distro or do you have a split phase 240V distro?
  2. Thank you so much for ur reply bro! http://www.powerstream.com/Wire_Size.htm
  3. my only complain is when the amp becomes warmer, ther is a lack on punch, i guess thats the current balance system kicking in reducing power to keep the amp on. I used a K2 for about 4yrs to power 2 srx2718, now i used an IT6000
  4. Im planing on adding an ITech 8000 and 4000 and I want to make sure that I won be over flowing current in that cord and have an accident. can anyone tell me where can i find a formula so i can calculate the max power flow in that cord? thank U
  5. Hi guys I Need to calbulate how much power I can flow in a 10gauge cord, about 60 or 75 ft long, I been using two 15amp in parallel (30amp total) to power my rack. I know im below the limit cause at work we run this 220V 50Amp machine with the same cord even longer. 1- Itech 6000 @ 4 ohms 1-K2 @ usually 8ohms 1-power base2 @ 8ohms 1-1200watts fogger maching 3 strobe light about 5amps each 4 chauvet scaners 360w inrush power draw each all this pluss some a PC, mixing board, etc. thank u guys
  6. Hello guys sorry I try to make long story short. TCP/IQ utulity cant fint my itech6k, about over a year ago I made it work using a Xover cat cable, and reading some of the post here, unfurtuly my HD crash and I lost the old IQ and SA sofware. the Itech is runing on firmware ver 1.301 any help would be apreciated, thank U crown sounds great!!!
  7. What about furman products I have a It600 k2 and an old Power Base 2 and when I turn it up my PC goes crazy and some times i had pop 30amp breakers. would that furman product work. I have power dis but its a pain to be runing 2 separet power lines that are not in the same breaker... 8(
  8. 4/8ohm per side would set you @2 ohm stereo mode ofcourse im sure that amp can handle that load. I have run Power base at 2 ohms with out a problem but i woudnt recomend it...
  9. Hi guys, OK I got the IQwic to talk to my Itech6000, but now Im scared of blowing up my JBL SR4718X. So, can some one steer me on how to build a data frame. I want to blow off the walls of that hall tomorrow but I dont want to melt the voice coils. My system is as follow: samcom 2/3 way stereo 3/4 mono Power Base 1 Power Base 2 K 2 ITech 6000 2 JBL sr4718X 2 dual 15"JBL 2032H 2 JBL titanium compresion drivers(highs) all coments are welcome....
  10. Ok i finally got the software to reconise the amp. ill guess now ill have to find a post for uploading presets to the amp and how to create them. I did connec the amp using a Xover cat5 cable (home made) My amp has a old firmware V. 1.301 I belive thats why i dont see the DHCP option on the front LCD. thank you very much.
  11. OK crossover cat 5 cable? I used a ethernet cable for dsl. is this is why my ethernet is not detecting. I had my DSL wireless router connected while trying to set up the amp. So if I dissconect the wiresless router the wisar should communicate with the amp? Sorry but as u can tell I am a new into all this...
  12. thank you, my PC has an open ethernet jack wichi dont use. I use a wiresless PCI card adapter and a parker vision wireless router would it do the trick or I need a wired router? I assum the best way would be to wire the amp to the pc right? or it has to connect thru a router? where is this down load located i went to donwload and fount this Vertec_I-Tech_V3a_SystemArchitect is what i need or do I need to down load the Iqnet. sorry. as you can see im new here and to this Itech software althoug im a 11 years crown custumer. Thank you. Thank you I i succefully download the software but the wizard won display it on the list.
  13. thank you, my PC has an open ethernet jack wichi dont use. I use a wiresless PCI card adapter and a parker vision wireless router would it do the trick or I need a wired router? I assum the best way would be to wire the amp to the pc right? or it has to connect thru a router? where is this down load located i went to donwload and fount this Vertec_I-Tech_V3a_SystemArchitect is what i need or do I need to down load the Iqnet. sorry. as you can see im new here and to this Itech software althoug im a 11 years crown custumer. Thank you. Thank you
  14. Hi my name is Oscar Im a mobil DJ and recently i acquired a ITech 6000. that it has some custom setings. I was told by the seller that in order to reset the amp to defoult settings i would need the software IQ and or arquitech. is this true? is this true , I need the amp ready for this weeks gig. is there a local authoreised dealer than could reset my amp to manufactor settings. Is it possilve that i could purchase the CD that coms with the I techs map. thank you Oscar V.